Specifications

• Standard&Protocol: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at
• LED
  • 24 x Link/Act LEDs
  • 1 x G1 LED
  • 1 x G2/SFP2 LED
  • 1 x PoE-MAX LED
  • 1 x Power LED
• Interface
  • 24 x 10/100 Mbps Base-TX RJ45 ports (Data/Power)
  • 1 x 10/100/1000 Mbps Base-T RJ45 ports (Data)
  • 1 x 1000 Mbps Base-X SFP port (Combo)
• Forwarding Rate: 6.55 Mpps
• Switching Capacity: 8.8 Gbps
• MAC Address Table: 16K
• Lightning Protection: ≥6KV
• Input Voltage: AC: 100-240V~50/60Hz
• PoE Supply
  • Ports 1-24 support standard IEEE802.3af/at
  • 30W output per PoE port
  • 230W output of the total PoE Power
• Power Consumption: 250W output the whole device
• Dimension: 440 x 178.8 x 44mm
• Four Modes
  • Standard: Default mode of the switch. In this mode, it works as an unmanaged switch all ports can communicate with each other separately.
  • Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority port. All ports can communicate with each other separately.
  • Extend: In this mode, data rate of ports 17 - 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other.
  • VLAN: In this mode, ports 1 - 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast.
• Environment
  • Operating Temperature: 0℃~45℃ (32℉~113℉)
  • Storage Temperature: -40℃~70℃ (-40℉~158℉)
  • Operating Humidity: 10%~90% non-condensing
  • Storage Humidity: 5%~90% non-condensing
• Warranty: 1 Year

Manufacturer's Link