As part of its ‘hardcore’ spirit towards the ultimate in custom PC water cooling, Thermaltake has launched the Pacific RL120 Water Cooling Kit. A LCS combo unit, the kit consists of one CPU water block, one PR15 pump and reservoir, one 120mm radiator, six compression fittings (chrome), one PWM curve fan, tube, blue coolant, and other accessories. Together, these provide exceptional performance, unrivalled reliability, and styling to DIY enthusiasts.

Pacific W1 CPU Water Block

The W1 CPU water block is constructed with a copper base and anti-corrosive nickel plating to provide exceptional heat transfer and cooling performance. Fits all modern CPU sockets.

Pacific PR15 Reservoir/Pump Combo

The PR15 includes a 200ml reservoir and P500 pump to provide the perfect combination for proper water cooling circulation and capacity. Manufactured from high quality POM and PMMA material.

Pacific RL120 Radiator

With a high-density fin design (FPI: 14), the 120mm radiator is optimized to accommodate high airflow and high air pressure to provides superior cooling performance to all components.

Pacific 1/2” ID x 3/4” OD Compression Fittings (Chrome)

Six durable brass compression fittings allow proper connection to G1/4” ports to properly secure to cooling components.

120mm PWM Curve Fan

A 120mm PWM fan maximizes the cooling performance with speeds up to 2000RPM

V-Tubler 4T tubing

Includes V-Tubler ID 1/2” (13mm) water tubing 

Coolant 1000 Blue

Eco-friendly pre-mixed red coolant. Prevent corrosion, rust and scaling

Remarkable Expansion

The Pacific RL120 water cooling kit provides multiple LCS components for enthusiasts to build up aesthetically-superior water cooling systems by incorporating modular upgrades for their chassis.

Specifications

• Pump&Reservoir: 97.5(L) x 84 (W) x 289.4 (H) 
• Radiator dimensions: 282.5 (L) x 129 (W) x 64 (H) 
• Tube Dimensions: OD: 3/4” (19 mm) / ID: 1/2”(13 mm)
• Fan Speed: PWM 1200 ~ 2000 RPM
• Coolant Color: Blue
• Socket Compatibility
  • Intel LGA 2011/1366/1155/1156/1150/775
  • AMD FM2/FM1/AM3+/AM3/AM2+/AM2

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
2. Do not use tap water as your coolant, it may harm your loop and reduce performance.
3. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.

DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately

Fill the reservoir to the top as it will prevent air from going into the pump

If necessary tilt the system slightly from side to side to bleed the air out of the loop.

Place some paper towels under fittings and joining points to test for leaks.

Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop

Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.

Coolant might fade over time.

Please note: Check your chassis compatibility before purchase! This kit requires extensive DIY planning, assembly and testing work. If you are not comfortable with doing this yourself kindly let us assist you. We charge an assembly fee.

Product Link