Thermaltake Coolant 1000 Transparent

The Thermaltake Coolant 1000 Series was formulated with the perfect combination of cooling performance and anti-corrosive protection. Premixed with no need for additional additives, this high performance coolant protects each component while providing optimal flow throughout the system. 

Eco-friendly Anti-corrosive Solution

Being non-toxic and non-flammable the Coolant 1000 is an eco-friendly pre-mixed solution with a 2 year shelf life. Provides great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion. In addition, users can easily refill by using the refill bottle. 

- Boiling Point: 210.2℉ (99℃)

- Freezing Point: -4℉ (-20℃)

Easy Application

Thermaltake Coolant 1000 is designed specifically for PC liquid cooling systems. The features of the Coolant 1000 include anti-freezing, anti-rusting, and water scale prevention. This coolant can reduce the temperature of the system effectively and further enhance the thermal efficiency.

Specifications

• Capacity: 1000 ml
• Color: Transparent

Major Material Ingredients

• Water ~94%
• Propylene Glycol ~6%
• Other materials:
• Ethylene diamine tetra acetate detetrasodium (ED .TA.4Na)0.1%
• Methy paraben (M.P) 0.1%
• Color pigment 0.002%

Caution:

May be harmful if swallowed, may cause birth defects. May cause respiratory tract, eye and skin irritations. Keep out of reach of children. Avoid breathing any vapors or spray mists. Use with adequate ventilation. Avoid contact with skin and eyes. Keep container tightly closed when not in use. Wash thoroughly after handing. Store in a cool place.

Thermaltake recommends the following steps to be taken after completing your water loop setup

It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.

Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.

DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately

Fill the reservoir to the top as it will prevent air from going into the pump

If necessary tilt the system slightly from side to side to bleed the air out of the loop.

Place some paper towels under fittings and joining points to test for leaks.

Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop

Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.

Coolant might fade over time.

Please note:

• This item is not eligible for courier delivery due to the contents thereof.

Product Link