SUNIX SER6427AL, PCI Express serial communication boards meet the PCI Express Base Specification Revision 2.0. It is compatible with PCI Express x1, x2, x4, x8 and x16 lane Bus allowing it to be installed in any slim size PC-based system with low profile bracket structure. The majorities of today’s motherboards is not equipped with serial ports or only have one serial port. With SUNIX PCI Express serial board, users can add 1 serial port to their system, allowing them to use serial devices further. SUNIX SER6427AL card has 128-bytes onboard FIFO buffer and compatible with 16C950 UART specification. It is designed with SUNIX UART controller, SUN2212 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial and industrial automation applications.

Specifications

General
- Interface: RS-232
- Controller: SUNIX SUN2212 (16C950 UART Compatible)
- BUS: PCI Express Spec 2.0, Single-Lane (x1)
- IRQ & IO: Assigned by System

Serial Communication
- Interface: RS-232
- No. of Port: 1-port
- FIFO: 128byte Hardware
- Signal: DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
- Baud rate: 50bps ~ 115.2Kbps
- Stop bit: 1, 1.5, 2
- Parity: even, odd, none, mark, space
- Flow Control: None, Xon/Xoff, RTS/CTS
- Protection:
    - ±15KV ESD protection for each signal Human Body Model (HBM)
    - ±15KV IEC1000-4-2 Air Gap Discharge
    - ±8KV IEC1000-4-2 Contact Discharge
- PCB Connector: DB9 Male

Driver Support
- Microsoft Client: XP/Vista/7/ 8 (X86/X64)
- Microsoft Server: 2000/2003/2008 / 2008R2 (X86/X64)
- Microsoft Embedded: Windows CE4.2/5.0/6.0 / XP Embedded / POS Ready 2009 / Embedded System 2009
- Linux: Linux 2.4.x/2.6.x/3.x - DOS: DOS
- FreeBSD: FreeBSD 5.3~5.5 / 6.0~6.4
- QNX: QNX 6.3.2/6.4.0

Manufacturer's product page