Sunix MIO6479HL 2-port High Speed RS-232 & 1-port Parallel Low Profile PCI Express Card

R825.22
R949.00
AC-SI6479HL+S
Warehouse
+
  • When Do I Get It?

The majority of today’s motherboards are not equipped with any RS-232 or Parallel port. With SUNIX MIO6479HL Multi I/O board, users can expand two RS-232 COM and one IEEE1284 LPT ports to their system, allowing them to use serial and parallel devices further. This board is compatible with PCI Express x1, x2, x4, x8 and x16 lane, allowing the board to be installed in virtually any slim size PC system with low profile bracket structure. SUNIX MIO6479HL built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application.

Features

  • Expands 2-port High-Speed RS-232 COM and 1-port IEEE1284 LPT on system.
  • With high reliable SUNIX SUN2410 native PCI Express 16C950 UART and IEEE1284 controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Support IEEE 1284-1994 parallel port standard. * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port) * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port).
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Low profile bracket design idea for slim or portable PC.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Specifications

InterfaceRS-232 and IEEE1284
ControllerSUNIX SUN2410 (16C950 UART Compatible)
BUSPCI Express Spec 2.0, Single-Lane (x1)
IRQ & IOAssigned by System

Serial Communication

InterfaceRS-232
No. of Port2-port
FIFO128byte Hardware
SignalDCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate50bps ~ 921.6Kbps
Stop bit1, 1.5, 2
Parityeven, odd, none, mark, space
Flow ControlNone, Xon/Xoff, RTS/CTS
Protection±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge
PCB ConnectorDB44 Female
Cable ConnectorDB 9 Male

Parallel Communication

InterfaceIEEE1284
No. of Port1-port
ModeSPP / ECP / EPP / BPP
FIFO16byte Hardware
SpeedMaximum 1.8MBps
PCB ConnectorDB44 Female
Cable ConnectorDB25 Female

Driver Support

Windows ClientXP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server2003 / 2008 / 2012 / 2016 (X64)
Windows EmbeddedXP Embedded / POSReady 2009 / POSReady / Embedded System 2009
LinuxLinux 2.x / 3.x / 4.x / 5.3
DOSDOS
*UNIXFreeBSD / QNX / SCO OpenServer / SCO UnixWare / Solaris
*IBM OS/2WARP 3/WARP 4
"*" marked as a project supported operating system. Please contact us if you have any further need.

Regulatory Approvals

HardwareCE, FCC, VCCI, BSMI
SoftwareMicrosoft WHQL Windows • Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64) • Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature0 to 60°C (32 to 140°F)
Operation Humidity5 to 95% RH
Storage Temperature-20 to 85°C (-4 to 185°F)

Dimension


PCB Dimension92 x 69 mm
BracketLow Profile 80 mm
Bracket Space1

Notes 

* LPT port does not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378/3BC ISA address under Microsoft Windows nor Linux operation systems.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.


Manufacturer's link