The Xtender is a high-airflow panorama case for maximum air circulation. Five pre-installed fans ensure efficient cooling of high-performance components. The power supply unit (PSU) will be mounted approximately 20 mm above the bottom to ensure an optimal supply of fresh air.

Flexible Mounting for Up to Six Drives

Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive.

3D Cable Pass-Throughs for Improved Aesthetics

For clean cable routing behind the motherboard and a tidy interior.

A-RGB PSU Cover

Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case.

Vertical Mounting for Graphics Cards

Enables vertical GPU installation with a 160 mm PCIe Gen 4 riser cable.

6-Year Warranty – Because Satisfaction Matters

Our products are tested under extreme conditions. The 6-year warranty isn’t just a promise – it’s a testament to our confidence in their durability.

SPECIFICATIONS

• Compatibility and Clearances
  • Motherboard Support: up to E-ATX (285 mm wide)
  • Fan Support
    • Top: 3x 120 mm | 3x 140 mm
    • Side: 3x 120 mm | 3x 140 mm (included)
    • Rear: 2x 120 mm (included)
  • Radiator Support
    • Top: 240 / 280 / 360 / 420 mm
    • Side: 240 / 280 / 360 / 420 mm
  • CPU Cooler: up to 171 mm
  • PSU: ATX up to 318 mm (200 mm with HDD Cage)
  • GPU: up to 482 mm (337 mm with Side Radiator)
  • Front I/O
    • USB-C (USB 3.2 Gen2x1 - 10 Gbps)
    • 2x USB-A (USB 3.2 Gen1x1 - 5 Gbps)
    • 3.5 mm Jack (Line-In/Out)
    • Power Button
  • Warranty: 6 Years
  • Operating Ambient Temperature: 0–40 °C
  • Net Weight: 15.4 kg
  • Dimensions (LxWxH): 529 x 231 x 529 mm
  • Drive Bays
    • Behind the Mainboard Tray: 3× 2.5"
    • HDD Cage: 2x 3.5" / 2.5" + 1x 2.5"
  • PCI Slots: 7
  • Side Panel: Tinted Tempered Glass
  • Cable Management Space: 35 mm
  • Dust Filters: Top, Right Side
• PSU RGB Stripe Specifications
  • LEDs: 24× A-RGB Gen 2 LEDs
  • Current | Voltage: 0.89 A | 5 V DC
  • Connector: 3-Pin A-RGB Plug + Socket
• Fan Specification
  • 2x P12 Pro A-RGB (pre-installed at rear)
    • Speed: 600–3000 rpm
    • Air Flow: 77 cfm | 131 m³/h
    • Static Pressure: 6.9 mmH₂O
    • Bearing: Fluid Dynamic Bearing
    • Current | Voltage: 0.33 A | 12 V DC
    • Connector: 4-Pin Fan Plug + Socket
    • RGB Specifications
      • LEDs: 12x A-RGB Gen 2 LEDs
      • Current | Voltage: 0.40 A | 5 V DC
      • Connector: 3-Pin A-RGB Plug + Socket
  • 3x P14 Pro Reverse A-RGB (pre-installed at side)
    • Speed: 400–2650 rpm
    • Airflow: 98 cfm | 166.5 m³/h
    • Static Pressure: 5.1 mmH₂O
    • Bearing: Fluid Dynamic Bearing
    • Current | Voltage: 0.40 A | 12 V DC
    • Connector: 4-Pin Fan Plug + Socket
    • RGB Specifications
      • LEDs: 12x A-RGB Gen 2 LED
      • Current | Voltage: 0.40 A | 5 V DC
      • Connector: 3-Pin A-RGB Plug + Socket
• Vertical GPU Mounting Kit Specification
  • Dimensions(LxWxH): 196 x 153 x 140 mm
  • Supported Graphics Cards: Up to 482 mm Length and 3-Slots Wide
  • Compatibility: PCIe 4.0 and backwards compatible
  • Riser Cable: 160 mm, PCIe 4.0 x16
  • PCI Slots Required: 7

Manufacturer's product page