Features

• PCI Express Base Specification Revision 3.0 single-lane ( x1)
• Compliant with Universal Serial Bus 3.2 specification Gen2
• Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1
• Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices
• Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps
• Expands single external USB3.1 Super-Speed plus Type-C port (DFP) on the system
• USB port supplies maximum +5VDC / 3000mA power output to USB device
• Built-in over current protection on each USB port
• Support device remote wakeup function from USB keyboard or mouse
• Hot-swapping feature allows connect/disconnect device without powering down the system
• Driver supports for Microsoft Windows 7, 8.x and 10 operation systems

Specifications

• Hardware
  • BUS: PCI Express Spec 3.0, Single-Lane (x1)
  • Controller: PCI Express USB3.2 Host controller, Asmedia ASM1142
  • USB Standard: eXtensible Host Controller Interface (xHCI) Rev1.1
  • IRQ & IO: Assigned by System
• USB Communication
  • Interface: Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
  • Speeds: Super Speed+ (10Gpbs), Super Speed (5Gpbs), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
  • No. of Ports: 1-port
  • PCB Connector: USB3.2 USB Type-C port (Downstream Facing Port)
  • Protection: ±15KV IEC61000-4-2 Air Gap Discharge, ±8KV IEC61000-4-2 Contact Discharge
• Power
  • Source: +5VDC / SATA Power Connector Type
  • Output Capacity: USB Type-C Port: +5VDC / Maximum 3.0A / each port
  • Note: Total power output capacity will be limited by system power supply.
  • Over Current Protection: USB Type-C Port: +5VDC / Maximum 3.7A / each port
  • Power Consumption: 1.1 W @ 3.3V (board only without power output to USB device)
• Driver Support
  • Windows 7 (X86/X64), Windows 8.x / 10 (X86/X64) (Windows in-box driver)
  • Linux 2.6.31 or later (Linux OS already implemented USB3.0 driver)

Please note: Requires 1x SATA power connector

Product Link