Features

• Fast charge in 4 hours
• Built-in microprocessor controller
• Boost and buck AVR for voltage stabilization
• Free monitoring software (download required)
• Overload, discharge, and overcharge protection

Input

• Voltage 220/230/240 VAC
• Frequency Range 60/50 Hz (auto sensing)

Output

• 2000 VA / 1200 W
• Output Voltage: 220/230/240 VAC
• AC Voltage Regulation (Batt. Mode) ±10%
• Frequency Range (Batt. Mode) 60 Hz or 50 Hz ±1 Hz
• Transfer Time Typical 2-6 ms, 10ms max.
• Waveform (Batt. Mode) Simulated Sinewave

No dedicated AC Power cord with kettle plug (sold separately)

Please Note: A UPS is not designed to provide continuous power, merely a window period of minutes that allows a computer or other user to finalize the work at hand and shut down safely. It's ability to do this is dependent on the number of devices connected to the UPS. Any use of a UPS unit for powering devices outside of normal office equipment can and will void your warranty.

To establish what you can and cannot connect, calculate the total wattage you need to supply and ensure that the UPS you purchase meets that requirement. 

Take care not to let the UPS batteries run down completely to 0% - this can damage the batteries. Use the UPS software to control and manage the unit properly.

* Regarding fan noise: UPS fan stays on under charging and discharging cycles. Fan noise is high

* Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.